Specific gravity: 1.41-1.43 g / cm3 
Molding shrinkage: 1.2-3.0% 
Molding temperature: 170-200 ° C 
Drying conditions: 80-90 ° C 2 hours

Material performance:
Good comprehensive performance, high strength, high stiffness, good wear resistance, low water absorption, good dimensional stability, but poor thermal stability, easy to burn, easy to age in the atmosphere.

Suitable for making wear-resistant parts, transmission parts, and parts such as chemicals and instruments

Molding performance:
1. Crystallized material, the melting range is narrow, the melting and solidification are fast, and the crystallization occurs when the material temperature is slightly lower than the melting temperature. Medium mobility. Low moisture absorption, no drying treatment.

2. The friction coefficient is low, the elasticity is good, and the surface of the plastic part is prone to surface defects of wrinkles.

3. It is easy to decompose and the decomposition temperature is 240 degrees. Irritating and corrosive gases occur during decomposition. Therefore, the mold steel should be made of corrosion-resistant materials.

Applications:
Can replace most non-ferrous metals, automobiles, machine tools, instrument parts, bearings, fasteners, gears, springs, pipes, conveyor belt accessories, electric water tanks, pump casings, drainers, faucets, etc